Filter
Top Products
Playback
61
Playback settings (PLAY SETUP)
The playback format and method can be set.
Setting the playback format
(PB FORMAT)
Set the format for playback.
1
Press the [MENU] button.
Using the setup menus (Page 29)
2
Select [PLAY SETUP] → [PB FORMAT], and
then press the [ENTER] button or
.
3
Press to select the playback format,
and then press the [ENTER] button.
Available formats:
When [SYSTEM FREQ] is set to [59.9Hz]
1080/60i (30P), 1080/24P, 720/60P (30P),
720/24P
When [SYSTEM FREQ] is set to [50Hz]
1080/50i (25P), 720/50P (25P)
The initial setting is the format that was set •
in [REC FORMAT] in the [RECORDING
SETUP] setup menu (REC mode).
4
Press the [MENU] button to return to the
thumbnail screen.
Clip numbers will be displayed in black •
where playback is possible, and in red where
playback is not possible.
Even if the playback format is changed,
the format set in [REC FORMAT] in the
[RECORDING SETUP] setup menu will be
restored when the mode is changed to REC
mode.
Repeat playback (REPEAT PLAY)
Use this setting to repeatedly play back all
available clips.
1
Press the [MENU] button.
Using the setup menus (Page 29)
2
Select [PLAY SETUP] → [REPEAT PLAY] →
[ON].
3
Press the [MENU] button to return to the
thumbnail screen.
is displayed on the LCD monitor screen.
When the playback is operated, the playable
clips are played back repeatedly.
Repeat playback will continue until playback •
is stopped.
To turn the repeat playback setting off, select •
[OFF] in step
2.