Filter
Top Products
82
Setup menu list
Item
Display
mode
Description of settings
SYNCRO
SCAN
CAM
Adjusts the synchro scan shutter speed used for shooting images on a TV
screen, etc.
When or is pressed and held, the settings change at a faster rate.
When [SYSTEM FREQ] is set to [59.9Hz]
60P/60i:
•
1/60.0...1/250.0 (Factory default setting is 1/60.0)
30P:
•
1/30.0…1/48.0…1/250.0
24P:
•
1/24.0…1/48.0…1/250.0
When [SYSTEM FREQ] is set to [50Hz]
50P/50i:
•
1/50.0...1/250.0 (Factory default setting is 1/50.0)
25P:
•
1/25.0…1/48.0…1/250.0
DETAIL LEVEL CAM Adjusts the level of the image outline correction (in the horizontal and vertical
directions).
-7…0…+7
V DETAIL
LEVEL
CAM
Adjusts the level of outline correction in the vertical direction.
-7…0…+7
DETAIL
CORING
CAM
Adjusts the level of noise reduction for the detail signal.
-7…0…+7
Set to – for a clearer image. The noise will increase slightly.
Set to + to reduce noise.
CHROMA
LEVEL
CAM
Adjusts the chroma level.
-7…0…+7
CHROMA
PHASE
CAM
Makes fine adjustments to the chroma phase.
-7…0…+7
COLOR TEMP CAM
Makes fine adjustments to the color temperature.
-7…0…+7
MASTER PED CAM
Adjusts the master pedestal (black level of the image) that is used as the basis
for images.
-15…0…+15
A.IRIS LEVEL CAM
Sets the desired auto iris level.
-10…0…+10
DRS CAM
Sets the DRS (Dynamic Range Stretcher) function.
The dynamic range can be expanded by compressing the level of the video
signals in high-brightness areas where overexposure occurs during normal
shooting.
OFF, 1, 2, 3
The higher the setting, the higher the compression level of the high-brightness
•
areas.
The higher the setting, the greater the noise in the darker areas.
•
indicates the factory default setting.
When the [SYSTEM FREQ] (Page 92) setting in [OTHER FUNCTIONS] is changed, the [SYNCRO SCAN]
(Page 82), [REC FORMAT] (Page 84) and [HDMI OUT SEL] (Page 87) settings are changed to the factory
default.
CAMERA SETUP