Filter
Top Products
Displays
75
The remaining battery capacity display is •
a guideline and may change according to
usage conditions.
The remaining battery capacity display will •
momentarily disappear when switching
between modes or changing the LCD
brightness, because the capacity is
recalculated at these times.
Not displayed when using the AC adapter.•
You can switch between displaying and •
not displaying this information by selecting
[CARD & BATTERY] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
28 Repeat playback display
(In PB mode: Page 61)
Displayed when [REPEAT PLAY] → [ON] in the
[PLAY SETUP] setup menu is selected.
29 Operation status display
(In REC mode)
REC: Recording
PAUSE (green): Recording standby
PAUSE (red): Recording paused
Displayed when an error occurs in the input •
signal during recording.
When the input signal returns to normal, the •
recording restarts.
When the [REC/PAUSE] button is pressed, •
the display changes to green.
CHK: REC CHECK in progress
(In PB mode)
: Playback
: Playback paused
INDEX [
]: Playback paused at index position
( ): Frame-by-frame playback
(Frame-by-frame reverse
playback)
( ): Next clip (Previous clip)
( ): Fast forward playback
(Approximately 5 times the
speed
∗
)(Rewind playback
(Approximately 5 times the
speed
∗
))
∗
Approximately 6 times normal speed when
the [PB FORMAT] is set to 720/24P.
( ): Fast forward playback
(Approximately 15 times the
speed
∗
)
(Rewind playback (Approximately
15 times the speed
∗
))
∗
Approximately 20 times normal speed when
the [PB FORMAT] is set to 720/24P.
( ): Paused in final scene (paused in
initial scene)
30 Input signal display
SDI: Displayed when in SDI mode.
The display flashes when recording cannot •
be performed, such as when the input signal
and recording format are different.
CAM: Displayed when in CAM mode.
Flashes if the camera head has an •
abnormality, such as a malfunction or broken
cable.
INT: Displayed when [INT SG] → [ON] in the
[RECORDING SETUP] setup menu is
selected. (Page 84)
You can switch between displaying and •
not displaying this information by selecting
[OTHER DISPLAY] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
31 Recording function display
P-: Displayed when PRE REC is set.
(In CAM mode: Page 49)
A-: Displayed when [AUTO REC] in the
[RECORDING SETUP] setup menu is set to
something other than [OFF]. (In SDI mode:
Page 84)
32 Audio output adjustment level display
(Page 68)/Microphone input adjustment
level display (Page 47)
When the [AUDIO MON/ADV] button is
pressed, the sound volume output from
the built-in speaker and headphone jack is
displayed.
During input audio level adjustment, “I.MIC” or
“E.MIC” is displayed instead of “VOLUME”.
33 Safety zone
The range is displayed in accordance with the
[SAFETY ZONE] (Page 88) setting in [DISPLAY
SETUP].
When [4:3] is selected:
This displays the positions for
4:3 cropping.
When [90%] is selected:
This indicates the range
(90 %) that can be displayed by
an ordinary home-use television.
When “EXPANDED” is displayed because •
the focus assist function of CAM mode is
being used, the safety zone is not displayed
on the LCD monitor screen.
(For using focus assist, see page 46.)