Filter
Top Products
Recording
55
You can add the video and audio systems, name
of the videographer, shooting location, text memos
and other information to the video data you have
recorded on the SD Memory Card. This data is
called the clip metadata.
(Display method: Page 65)
There are 2 kinds of clip metadata: the data that
is recorded automatically during shooting, and the
data in the metadata upload file created on the SD
Memory Card which is loaded onto the portable
recorder.
(Loading method for clip metadata: Page 56)
Description of clip metadata
You can set the underlined items below by loading
the metadata upload file on the SD Memory
Card. All other items are set automatically during
recording.
GLOBAL CLIP ID:
This indicates the global clip ID that shows the
shooting status of the clip.
USER CLIP NAME:
This indicates the name of the clip that the user
has set.
∗
1
VIDEO & AUDIO:
This indicates the recorded image’s FRAME
RATE, RESOLUTION, PULL DOWN system and
AUDIO.
ACCESS:
This indicates the CREATOR (name of the
person recording), CREATION DATE (recording
date), LAST UPDATE DATE (date on which
the data was last updated) and LAST UPDATE
PERSON (the person who last updated the
data).
DEVICE:
This indicates the MANUFACTURER
(manufacturer of the equipment), SERIAL NO.
(serial number of the equipment) and MODEL
NAME (equipment model name: AG-HMR10).
SHOOT:
This indicates the SHOOTER (name of the
videographer) and the PLACE NAME (name of
location).
LOCATION:
This indicates ALTITUDE, LONGITUDE,
LATITUDE, and SOURCE (information source).
SCENARIO:
∗
2
This indicates the PROGRAM NAME,
SCENE NO. and TAKE NO.
NEWS 1:
This indicates the REPORTER
(name of the reporter) and PURPOSE
(purpose of data collection).
NEWS 2:
This indicates the OBJECT (target of data
collection).
MEMO:
∗
3
This indicates the PERSON (name of the person
who recorded the text memo) and TEXT
(contents of memo).
∗
1
If there is no information in the metadata upload
file, consecutive five-digit numbers will be
applied to the clips in the order that they were
recorded, with the first clip to be recorded given
the number 0. The USER CLIP NAME recording
method is selectable. See page 57 for details.
∗
2
When SCENARIO is to be input, you must input
PROGRAM NAME. You cannot input SCENE
NO. and TAKE NO. only.
∗
3
When MEMO is to be input, you must input
TEXT. You cannot input PERSON only.
Only printable ASCII characters can be •
displayed by this portable recorder.
Because there is a limit to the number of •
characters that can be displayed by this
portable recorder, not all the data can be
displayed. (This does not mean that the data
which is not displayed has been deleted.)
Use the AVCCAM Viewer or other program to
check all the data.
Metadata can be created with AVCCAM •
Viewer. (Page 100)
Clip metadata