Filter
Top Products
SentinelRAID 170 Installation and Hardware Reference Manual
I--2 Index
I/O port cabling, 2-2
I2C bus, 1-10
I2C connector, 1-2, 1-5, 3-3
I2C, 3-1
impedance, 4-1
installation procedure, 2-3
irreparable damage, 5-1
--J--
jumper setting, 4-6
jumpers, 1-4
--L--
LAN port, 1-2
LCD panel, 1-2, 1-3, 1-10, 3-2, 5-1
LCD screen, 1-3, 2-4, 4-8
LED, 3-1
local Spare, A-2
--M--
maintenance operations, 5-1
maintenance procedures, 5-1
maintenance, 5-1, A-1
memory capacity, 2-5
memory module, 2-1, 4-7
module locations, 2-2
monitoring, 5-1
mounting holes, 1-2
--N--
Notification Process Center, 3-1
Null Modem, 4-6
--O--
onboard connectors, 1-4
operational temperature range, 1-10
--P--
Partner Failed!, 1-4
PC hyper-terminal, 1-2, 1-7
power connection, 4-6
power cord connectors, 1-8, 1-9
power cord sockets, 1-2, 1-5
power cord, 1-8
power down, 4-9
power failure, 1-8
power input, 4-6
Power Off, 4-9
power on, 4-7, 4-8
power source, 2-1
power supplies, 1-2, 1-9, 2-2
power supply connection, 1-8
PowerPCR 750CXe, A-2
propagation delay, 4-1
PSU connectors, 4-7
--R--
RAID levels, A-1, A-3
RAIDWatch, 1-2, 1-10, 3-1, A-1
redundant host paths, 4-4
regeneration of parity, A-2
replaceable, 5-1
RJ-45 Ethernet connector, 1-1
RS-232C connector, 1-5, 1-7
RS-232C serial cable, 1-7
RS-232C serial port, 1-2, 3-1
--S--
S.M.A.R.T, A-2
safety regulations, 5-1
SCSI cable, 1-8, 2-1, 4-1
SCSI connector, 1-1
SCSI termination, 4-2
SCSI-320 connectors, 1-2
SCSI-320 host, A-1
SCSI-320 I/O channels, 1-1, 1-9, 5-6
SDRAM DIMM module, 1-4, 2-5
SDRAM DIMM socket, 1-4
SDRAM, 1-1
self-monitoring features, 3-1
serial cable, 1-7
serial communication, 1-1
serial port, 3-1
single host, 4-2
spares, A-2
startup, 4-8
static electricity, 2-2
static free, 2-1
status indicators, 1-10
status-indicating LEDs, 1-2