Filter
Top Products
SentinelRAID 170 Installation and Hardware Reference Manual
2-10 Daughter Board Installation
Figure 2-7: Install the Daughter Board
Step 3. Insert the retention screws. Once the daughter board has been mounted
on the board-to-board connectors, insert the retention screws that came
with the daughter board. (See Figure 2-8)
Figure 2-8: Install the Daughter Board Retention Screws
Step 4. Replace the chassis top cover. Once the daughter board has been
installed on the controller board, reinstall the chassis top cover. For
further instructions on how to reinstall the chassis top cover, please refer
to Section 2.6.2.