Filter
Top Products
TERMINAL SETUP
Charging the Spare Battery on the Base Station
V
X
670 INSTALLATION GUIDE 33
1 Insert the USB dongle into the USB port located at the back of the Base
Station.
Figure 24 Inserting External Dongle Into USB Port
2 After inserting the external dongle into the USB port, place the V
x
670 terminal
onto the Base Station (see Powering Up the Base Station).
3 Connect the peripheral to the external dongle.
Charging the
Spare Battery on
the Base Station
The full-feature Base Station can charge the V
x
670 terminal while charging an
extra battery pack.
1 Connect the Base Station to a power source (see Powering Up the Base
Station)
2 Place the spare battery pack onto the Base Station as shown in Figure 25.
Figure 25 Putting Spare Battery Pack Into the Base Station