Filter
Top Products
TERMINAL SETUP
Installing the Smart Battery
V
X
670 INSTALLATION GUIDE 27
Manual Shutdown
Hold the red key down for about 4 seconds until the terminal displays the
shutdown verification screen. Keep holding the red key until the V
x
670 terminal
shuts down.
Installing the
Smart Battery
The V
x
670 smart battery fits in a slot on the back of the V
x
670 terminal, as shown
in Figure 17. The locking tab clicks when the battery is in place. The slot is keyed,
so that there is only one way to insert the battery.
Figure 17 Installing the Smart Battery
Removal
To remove the V
x
670 smart battery, press the locking tab and pull the smart
battery from its slot.
Figure 18 Detaching the Smart Battery from the V
x
670 Terminal
NOTE
• The 4-second shutdown delay is for preventing terminal shutdown if the red
key is accidentally held down. The time required to hold the red key down to
shut down the terminal is configurable (for more information, see the V
x
670
Reference Manual – VPN 24004).
• When the terminal has no power, the screen is blank and the green LED
indicator is not lit.