Filter
Top Products
TERMINAL SETUP
Installing the Paper Roll
V
X
670 INSTALLATION GUIDE 21
2 Lift the printer cover up and back.
Figure 9 Opening the Printer Cover
3 Remove any partial roll of paper in the printer tray by lifting it up (see Figure
10).
4 Loosen the glued leading edge of the paper or remove the protective strip
from the new roll of paper. Unwind the paper roll past any glue residue.
Figure 10 Removing Partial Paper Roll
5 Hold the roll so the paper feeds from the bottom of the roll when the terminal is
inverted (see Figure 12).