Filter
Top Products
TERMINAL SETUP
Using the Base Station
V
X
670 INSTALLATION GUIDE 31
For more information on charging the spare battery on the full-feature Base
Station and connecting external dongles to the USB ports, see Charging the
Spare Battery on the Base Station and Attaching the USB Dongles to the Base
Station.
Powering Up the
Base Station
Use the procedure in this section to connect the V
x
670 Base Station to a power
source.
1 Insert the round barrel connector of the power pack into the power port at the
back of the Base Station.
Figure 22 Connecting the Base Station to a Power Source
2 Insert the AC power cord into the power pack.
3 Plug the AC power cord into a wall outlet or power surge protector.
4 Confirm that the Base Station is powered up as indicated by the solid green
LED.