Filter
Top Products
TERMINAL SETUP
Installing/Replacing MSAM Cards
V
X
670 INSTALLATION GUIDE 23
9 Tear the paper off against the serrated plastic strip in the printer.
Installing/
Replacing MSAM
Cards
When you first receive your V
x
670 terminal, you may need to install one or more
MSAM cards or you may need to replace old cards.
To Install/Replace
MSAMs
1 Power off the terminal.
2 Place the terminal upside down on a soft, clean surface to protect the lens
from scratches.
3 Remove the battery.
Figure 13 Removing the Smart Battery
4 After removing the battery, the MSAM compartments are exposed.
5 Remove any previously installed MSAM card by sliding the card from the
MSAM cardholder.
CAUTION
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.
CAUTION
It is very important that the terminal is powered off before removing the battery.