Filter
Top Products
TERMINAL SETUP
Establishing Telephone Line Connections
V
X
670 INSTALLATION GUIDE 19
Establishing
Telephone Line
Connections
To connect a telephone line:
1 Connect one end of the telephone cord to the USB Modem Dongle.
2 Connect the USB Modem Dongle to the terminal using the AVX Connector
(VPN 24223-01-R).
3 Route the other end of the telephone cord directly to a telephone wall jack.
Figure 7 V
x
670 USB Modem Dongle Connection
CAUTION
The Modem Dongle and Serial Dongle are intended for use with the V
x
670
terminal and Base Station only. They should not be installed or used with any
equipment other than the V
x
670 terminal or Base Station.
WARNING
To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA
Certified Telecommunication Line Cord.
USB HOST CABLE
USB MODEM DONGLE