Filter
Top Products
TERMINAL SETUP
Examining Connection Ports
16 V
X
670 INSTALLATION GUIDE
• A magnetic card reader, built into the right side. Swipe the card using the
proper direction, with the magnetic stripe down and facing inward, toward the
keypad.
• A green indicator LED indicates power is ON.
• An internal thermal printer at the back of the terminal.
• A smart card reader, built into the front of the terminal. For directions on how
to use a smart card, see Conducting Smart Card Transactions.
• A SAM (security access module) compartment, built into the bottom of the
terminal. The V
x
670 terminal contains MSAM cardholders to support multiple
stored-value card programs or other merchant card requirements.
Examining
Connection
Ports
The Vx670 terminal has one primary port that supports different peripherals
through the use of various cables.
Figure 3 The V
x
670 Primary Port (Bottom View)
NOTE
VeriFone ships variants of the V
x
670 terminal for different markets. Your terminal
may have a different configuration. The following devices may or may not be
present: a smart card reader, or zero or three MSAM cardholders. However, the
basic processes described in this guide remain the same, regardless of terminal
configuration.