Filter
Top Products
TERMINAL SETUP
Examining Connection Ports
18 V
X
670 INSTALLATION GUIDE
Multiport Adapter
An adapter that provides connectivity for power, USB Host, USB Device, and
COM1 (RS232 UART). This cable is used primarily for deployment or
development purposes.
Figure 6 Multiport Adapter Connection to a V
x
670 Terminal
USB Modem Dongle
A modem in the form of a USB Modem Dongle may be provided with the V
x
670
terminal. The USB Modem Dongle provides communication via a telephone line at
speeds of up to 14,400 bps. It can also be connected to the full-feature Base
Station when the terminal is in the station (see Attaching the USB Dongles to the
Base Station).
USB Serial Dongle
(RS232 UART)
The USB Serial Dongle may be provided with the V
x
670 terminal. It is designed to
accommodate the RJ45 connector. The USB Serial Dongle can also be
connected to the full-feature Base Station when the terminal is placed in the
station (see Attaching the USB Dongles to the Base Station).
NOTE
Other cables are available for development purposes. Check with your local
VeriFone representative for further information.
NOTE
A Base Station may be provided with the V
x
670 terminal. A full-feature Base
Station has two USB host ports for external dongles as well as a battery charger
slot for charging an extra lithium-ion battery pack. A standard Base Station does
not have any USB ports and is capable of charging the terminal only and not the
extra battery pack.