Filter
Top Products
TERMINAL SETUP
Placing the Terminal Onto the Base Station
32 V
X
670 INSTALLATION GUIDE
Placing the
Terminal Onto
the Base Station
The V
x
670 terminal can be placed on the Base Station when not in use or to
charge the battery. External peripherals can also be attached to the terminal via
USB dongles while it is on the Base Station (see Attaching the USB Dongles to
the Base Station).
Figure 23 Placing the V
x
670 onto the Base Station
Attaching the
USB Dongles to
the Base Station
While the V
x
670 terminal is resting on the Base Station, you can drive external
peripherals through the use of USB dongles. Only one Modem Dongle and one
Serial Dongle can be connected to the Base Station. A second Modem Dongle or
a second Serial Dongle will be ignored by the terminal.
NOTE
The full-feature Base Station can also charge a spare battery while it charges the
battery attached to the terminal (see Charging the Spare Battery on the Base
Station).
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.
WARNING
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors.
Disconnecting the power during a transaction may cause transaction data files
not yet stored in terminal memory to be lost.
NOTE
The full-feature Base Station has USB ports for two external dongles. The
standard Base Station does not have USB ports.