Filter
Top Products
[Table of Contents][Previous Page] [Next Page]
1. HANDLING PRECAUTIONS
When installing or inspecting the machine, be very careful of the following points and pay attention to
ensure that the player can enjoy the game safely.
z
Be sure to turn the power off before working on the machine.
z
To insert or pull out the plug quickly is dangerous.
z
It is necessary to make sure that the power cord or the grounding wire is not exposed on the road,
etc. in a manner so as to be dangerous. Make sure that grounding connections are made safely at
the position where so specified.
z
Do not use any fuse that does not meet specified rating.
z
Make complete connections for the IC board and other connectors. Insufficient insertion is very
dangerous.
z
The operating (ambient) temperature range is from 5°C to 40°C.
z
When cleaning the CRT surfaces, use a soft, dry cloth. Do not apply chemicals such as thinner,
benzene, etc.
Also, for the IC board circuit inspections, only the logic tester is allowed. The use of a tester is not
p
ermitted, so be careful in this regard.
After confirming that there are no irregularities, turn the power ON.
CONCERNING THE PROJECTION DISPLAY:
A PROJECTION DISPLAY is used for this machine. The PROJECTION DISPLAY's screen is
susceptible to damage and therefore, when cleaning it, pay careful attention. For details, refer to
Section 13.
CONCERNING COMMUNICATION PLAY:
Herein stated is an independent use of the machine. This game, when linked with other units,
allows multiple persons to enjoy "communication play" simultaneously. For communication play,
refer to Communication Manual.
Pa
g
e 1 of 1Handlin
g
Precautions
7/12/2005htt
p
://www.sauservice.com/manuals/Da
y
tona%20Folder/DDhtml/DD01.html