Filter
Top Products
[Table of Contents] [Previous Page] [Next Page]
13-2 HITACHI PROJECTOR
HITACHI PROJECTOR CONTROL PANEL
STATIC CONVERGENCE ADJUSTMENT
N
OTE: Do not touch the right-hand side Convergence Adjustment SW. This SW is used for dynamic
convergence adjustment which is rather complicated and the adjustment's visual effect is almost
unnoticeable. Therefore, explanations thereof are not given in this
1. Press the left-hand side Convergence Adjustment SW to cause the cross pattern to appear on to the
screen.
2. Use the remote control to make static adjustment.
1. Press the left-hand side Convergence Adjustment SW. At this time, static adjustment results are
written and the PTV screen will return to the original screen mode.
Remote control [2], [5] Causes the red horizontal line to match with the
g
reen horizontal line.
Remote control [4], [6] Causes the red vertical line to match with the
g
reen vertical line.
Remote control [8], [11] Causes the blue horizontal line to match with the
g
reen horizontal line.
Remote control [10], [12] Causes the blue vertical line to match with the
g
reen vertical line.
Pa
g
e 1 of 1Hitachi Pro
j
ecto
r
7/12/2005htt
p
://www.sauservice.com/manuals/Da
y
tona%20Folder/DDhtml/DD41.html