Filter
Top Products
[Table of Contents] [Previous Page] [Next Page]
11-3 GREASING
Apply grease to the following points once every 3 months as a standard. Also, note that RUBBER RING
70 is not of an oil-resistant type and is susceptible to a quality deterioration if oil attaches.
Make sure that grease and any other type of oil do not adhere to it.
FIG. 11.4
11-4 REPLACEMENT OF RUBBER STOPPERS
Once every 6 months as a standard, check to see if any damage is caused to the rubber stoppers. If they
are damaged, replace them with the spare parts in the procedure shown in the FIG. below.
FIG. 11.5
Pa
g
e 1 of 1Greasin
g
& Re
p
lacement of Rubber Sto
pp
ers
7/12/2005htt
p
://www.sauservice.com/manuals/Da
y
tona%20Folder/DDhtml/DD38.html