Filter
Top Products
[Table of Contents] [Previous Page] [Next Page]
8. EXPLANATION OF TEST AND DATA DISPLAY
By operating the switch unit, periodically perform the tests and data check. When installing the machine
initially or collecting cash, or when the machine does not function correctly, perform checking in
accordance with the explanations given in this section.
The following shows tests and modes that should be utilized as applicable.
TABLE 8.1 EXPLANATION OF TEST MODE
ITEMS DESCRIPTION
REFERENCE
SECTIONS
INSTALLATION OF
MACHINE
When the machine is installed,
p
erform the followin
g
:
1. Check to see that each setting is as per standard setting
made at the time of shi
p
ment.
8 - 4, 8 - 5
2. In the INPUT TEST mode, check each SW and VR. 8 - 6, 8 - 8
3. In the OUTPUT TEST mode, check each of lam
p
s. 8 - 7
4. In the SELF-TEST mode, check ICs on the IC Board. 8 - 10, 8 - 11
MEMORY Choose MEMORY TEST in the MENU mode to allow the
MEMORY test to be performed. In this test, PROGRAM
RAMs, ROMs, and ICs on the IC Board are checked.
8 - 10, 8 -11
PERIODIC
SERVICING
Periodicall
y
p
erform the followin
g
:
1. MEMORY TEST. 8 - 10, 8 - 11
2. Ascertain each settin
g
. 8 - 4, 8 - 5
3. In the INPUT TEST mode, test the CONTROL device. 8 - 6, 8 - 8
4. In the OUTPUT TEST mode, check each of lam
p
s. 8 - 7
CONTROL SYSTEM 1. In the INPUT TEST mode, check each SW and VR. 8 - 6, 8 - 8
2. Ad
j
ust or re
p
lace each SW and VR. 9, 10, 11
3. If the problem can not be solved yet, check the
CONTROL's moves.
MONITOR In the MONITOR ADJUSTMENT mode, check to see if the
PROJECTOR ad
j
ustment is a
pp
ro
p
riatel
y
made.
8 - 7, 13
IC BOARD 1. MEMORY TEST 8 - 10, 8 - 11
2. In the SOUND TEST mode, check the sound related
ROMs.
8 - 9
DATA CHECK Check such data as game play time and histogram to adjust
the difficult
y
level, etc.
8 - 3
Pa
g
e 1 of 1Test and Data Dis
p
la
y
7/12/2005htt
p
://www.sauservice.com/manuals/Da
y
tona%20Folder/DDhtml/DD18.html