Filter
Top Products
[Table of Contents] [Previous Page] [Next Page]
12. COIN SELECTOR
HANDLING THE COIN JAM
Even when the REJECT button is pressed, if the coin is not rejected, open the coin chute door and open
the selector gate. After removing the jammed coin, put a normal coin in and check to see that the
selector correctly functions.
CLEANING THE COIN SELECTOR
1. Turn the power for the machine OFF. Open the coin chute door.
2. Open the gate and dust off by using a soft brush (made of wool, etc.).
3. Remove stain by wiping with a soft cloth which contains water or chemicals detergent.
4. Remove the CRADLE. When removing the retaining ring (E ring), b very careful so as not to
bend the shaft.
5. Remove stain from the shaft and pillow portions by wiping off with a soft cloth, etc.
6. After wiping off a per 5 above, further apply a dry cloth, etc. to cause the coin selector to dry
com
p
letel
y
.
Pa
g
e 1 of 2Coin Selecto
r
7/12/2005htt
p
://www.sauservice.com/manuals/Da
y
tona%20Folder/DDhtml/DD39.html