Filter
Top Products
[Table of Contents] [Previous Page] [Next Page]
8-2 TEST MODE
z
The Test Menu allows the functioning of each part of the Cabinet to be checked, the
PROJECTOR to be adjusted, and the coins and game related various settings to be performed.
z
Press the TEST SWITCH to cause the following Test Menu to be displayed on the monitor. (FIG.
8. 2)
z
Press the SERVICE SWITCH until the pointer ">>" is moved to the desired item. Also, note that
pressing VRI (red) causes the arrow to move downward and pressing VR4 (green) causes the
arrow to move upward.
z
Bring the pointer ">>" to the desired test item and press either the TEST SWITCH or START
SWITCH to cause the selected item's test to start.
FIG. 8. 2 TEST MENU
After the test is complete, move ">>" to "EXIT" and press the TEST SWITCH or START SWITCH to
return to the Game Mode.
Pa
g
e 1 of 1Test Mode
7/12/2005htt
p
://www.sauservice.com/manuals/Da
y
tona%20Folder/DDhtml/DD20.html