Filter
Top Products
43
Press the service button to select the INPUT TEST item in the GAME TEST MENU screen, and
press the test button. The following INPUT TEST screen appears.
Periodically test the input devices by using the screen.
B. INPUT TEST
INPUT TEST
STEERING WHEEL XXX
GAS PEDAL XXX
BRAKE PEDAL XXX
GEAR POSITION ON
START BUTTON OFF
VIEW CHANGE BUTTON OFF
SERVICE SWITCH OFF
TEST SWITCH OFF
PRESS TEST AND SERVICE BUTTON TO EXIT
• Each of STEERING WHEEL, GAS PEDAL, and BRAKE PEDAL indicates an analog
value. Make sure that the value can smoothly change as you operate the input device. If not
smoothly, readjust the volume or replace it with a new one. (See Chapter 10 and 12.)
• GEAR POSITION indicates N, 1, 2, 3, or 4. Make sure that the value can change as you
operate the 4-speed shifter. If not, replace the switch with a new one. (See Chapter 11.)
• Make sure that each of the rest of the input devices can change its indication from OFF to
ON as you operate the device.
• After testing, press the test button and the service button simultaneously. The GAME TEST
MENU screen reappears.
VIEW CHANGE BUTTON
START BUTTON
BRAKE PEDAL
GAS PEDAL
GEAR POSITION
STEERING WHEEL
FIG. 8. 3 b