Filter
Top Products
42 C1519M-E (6/06)
PAUSING SEQUENCES
1. Go to Main Menu 2.
2. Select .
3. Select or to scroll to the sequence number.
4. Select to pause the sequence.
5. Select again to restart the sequence.
OPERATING RELAYS
To operate relays from a KBD960 keyboard, you must know which GPI to call and which auxiliary (AUX) to select on the keyboard.
You can cascade two relay units. Each relay unit has eight GPIs. Relay Unit 1 has a GPI range of 1-8, and Relay Unit 2 has a GPI range of 9-16.
Refer to Tables W and X.
There are two ways you can operate relays from the KBD960.
ACTIVATING RELAYS USING F12
Follow these steps to activate a momentary relay:
1. Go to Main Menu 1.
2. Enter a logical relay contact number (1-128).
3. Press F12.
A momentary relay does not remain on. Only a latched relay remains on. If you want a latched relay, you must activate it from the GPI menus.
ACTIVATING RELAYS FROM THE GPI MENUS
You can activate relays from the GPI menus as momentary or latching. A momentary relay goes on briefly and then turns off. A latched relay
remains on until you turn it off.
NOTE: You will hear a brief click from the relay unit whenever you activate a momentary or latching relay contact.
Momentary
To activate relay contact 4, for example, follow these steps:
1. Go to Main Menu 1 and enter 1 (GPI). GPI 1 is associated with relay contact 4. Refer to Table C.
2. Select to bring up GPI Menu 1. This menu displays auxiliaries 1-4. Make sure is highlighted. When is highlighted, any
relay you activate will be momentary.
3. Select .
SEQ
GPI
MTRY MTRY
4