Filter
Top Products
C1519M-E (6/06) 33
FUNCTION KEY
Follow these steps to select a monitor using F22:
1. Press .
2. Enter a monitor number.
3. Press F22.
NOTE: F22 is the “enter” default, but you can assign this function to one of the other function keys.
SELECTING CAMERAS
There are also several ways you can select cameras.
MAIN MENU 1
1. Enter a logical camera number (1-9999).
2. Press or select . The camera number appears next to on the keyboard LCD.
CAMERA MENU
1. Select from Main Menu 1.
2. Cycle through the available cameras using and/or .
You can also enter a camera number and press or select .
FUNCTION KEY
Follow these steps to select a camera using F22:
1. Press .
2. Enter a camera number.
3. Press F22.
You can also use and to cycle through cameras.
NOTE: F22 is the “enter” default, but you can assign this function to one of the other function keys.
OPERATING PTZ CAMERAS
The controls for PTZ cameras are located on the right-hand side of the keyboard.
The proportional joystick allows variable speed drives. It gives you full control over the pan and tilt movements, from minimum to maximum
speed. Speed is proportional to the amount by which you move the joystick from its center location.
Press while moving the joystick to enable high speed operation.
The joystick only provides directional control when a fixed speed PTZ camera is installed.
The various functions of a PTZ camera can be controlled as follows:
1. To zoom in or out, use .
2. To focus near or far, use .
3. To open or close the iris, use .