Filter
Top Products
C1519M-E (6/06) 31
TESTING THE DISPLAY
1. Select while in the Diagnostic Mode.
2. Select to test graphic page 0.
3. Select to test graphic page 1.
4. Select to test graphic page 2.
5. Select to test the text page.
6. Select .
Figure 35. LCD Test
TESTING THE KEYBOARD
NOTE: If the software running on the KBD960 is v1.20 or later, then DIP switch 3 is used to indicate whether or not the software is taking
A-to-D readings from the zoom axis of the joystick. If DIP switch 3 is OFF, you should see three readings (xxx, xxx, xxx) on the keyboard test
screen. If the zoom A-to-D reading (the third reading) changes as you move the zoom top, DIP switch 3 should be OFF. If the zoom A-to-D reading
does not change as you move the zoom top, DIP switch 3 should be ON.
1. Select .
2. Press each key to ensure that the display shows the correct key.
3. Select .
NOTE: Version 1.20 and later displays three joystick positions (xxx, xxx, xxx).
I
Figure 36. Keyboard Test
G0
G1
G2
T0
G0
G1
LCD TEST
G2
T0
00926
KEYBOARD TEST vX.XX
PLEASE ENTER A KEY
Joystick Position – (xxx, xxx)
00927