Filter
Top Products
C1519M-E (6/06) 15
CONFIGURING THE COM PORTS
1. Select from Setup Mode and scroll to the Advance Setup 1 screen.
Figure 8.
Advance Setup 1
2. Select and/or to navigate to the COM 1 row.
3. Select and/or to assign a baud rate.
4. Select to set parity for the communications port.
5. Select to set the Host.
6. Select and/or to navigate to the Local Address row.
7. Select and/or to assign an address.
8. Select to save your configuration and then select to return to the Setup Mode.
Default Settings
• COM 1 - 19200 baud, No Parity, Set as HOST
• Address -1
NOTES:
•
COM 2 is functional, but only COM 1 is optimized for the protocol. COM 3 is not used for normal operation.
•
Pelco recommends that you reserve addresses 1-8 for the KBD960/KBR960 keyboards. In System 6800, you should not use an address
higher than 8.
ADV
Advance Setup 1
COM1 None (Host)
COM2 None
COM3 None
Local Address 1
00900