Filter
Top Products
38 C1519M-E (6/06)
If you move the associated camera through the area defined by the zone (approaching the zone edges from either direction), the zone label
appears on the selected monitor as you enter the zone and disappears as you exit the zone. Refer to Figure 40.
Figure 40. Basic Zone Creation
PARTIAL ZONE OVERLAP
Partial zone overlap occurs when the end of one zone overlaps with the beginning of another zone. The zone with the highest priority level
appears at all times. Refer to Figure 41.
Figure 41. Partial Zone Overlap
00931
ZONE A
BEGINS
ZONE B
BEGINS
ZONE A
ENDS
ZONE B
ENDS
THIS PORTION OF
ZONE B DOES NOT
A
PPEAR BECAUSE
ZONE A OVERLAPS
IT AND HAS A HIGHER
PRIORITY LEVEL.
THE REMAINDER OF
ZONE B DOES APPEAR.
ZONE A
PRIORITY 5
ZONE B
PRIORITY 2
00932