Filter
Top Products
C1519M-E (6/06) 23
Figure 21.
GPI Menu 2
Table J.
GPI Menu 1
Select to set the current GPI to the input value. Select to request control of the selected GPI and
send a message to gather information about the status of the auxiliaries within the GPI. You have
control if this icon is highlighted.
If this icon is highlighted, the auxiliary control method is momentary. If it is not highlighted, the
auxiliary control method is latching. In momentary mode, selecting the icon sends an AUX ON
command and releasing the key sends an AUX OFF command. The latching mode disables the
AUX OFF command from being sent when the key is released. In latching mode, you can specify a
number up to 6553 and then press the auxiliary number to set the auxiliary and have it unlatch at
the specified time (1-6553 in seconds). If you do not enter a number, the auxiliary latches until an
AUX OFF command is sent. You can issue an AUX OFF command by placing the keyboard in MTRY
(momentary) mode again and pressing the key (when the key is released an AUX OFF is sent and
the AUX ON when pressing the key is ignored).
Select to send a set auxiliary command for the auxiliary within the selected GPI. Pressing the key
sends an AUX ON and releasing it sends an AUX OFF in momentary mode.
Select to send a set auxiliary command for the auxiliary within the selected GPI. Pressing the key
sends an AUX ON and releasing it sends an AUX OFF in momentary mode.
Select to send a set auxiliary command for the auxiliary within the selected GPI. Pressing the key
sends an AUX ON and releasing it sends an AUX OFF in momentary mode.
Select to send a set auxiliary command for the auxiliary within the selected GPI. Pressing the key
sends an AUX ON and releasing it sends an AUX OFF in momentary mode.
Select to bring up GPI Menu 2.
Select to return to Main Menu 1.
GPI
MTRY
1
2
3
4
GPI
1 1
5 6 7 8
00913