Filter
Top Products
20
Basic operations for the menus
1. Set the MENU button to ON.
Press the MENU button to turn on its indicator.
2. Select the target menu.
Press any of the number buttons [21] to [50] to turn on its indicator.
The selected menu is displayed on the LCD panel.
3. Use the F1 dial and F2 dial to change the setting values.
Use the F1 dial and F2 dial to select the menus and change the
setting values.
Use the F1 dial for operations involving the items displayed on the
top line of the LCD panel. Use the F2 dial for operations involving
the items displayed on the bottom line of the LCD panel.
1
2
3
3
When “↓” is displayed for a setting value, it means that the
value will be confirmed and the setting reflected when the dial
is pressed. The “↓” indication will disappear after the dial is
pressed.
1.SHUTTER
Off
When “↓” is not displayed for a setting value, it means that the
value will be confirmed and the setting reflected when the dial
is turned.
2.SPEED
1/100
For details on the settings for each of the menus, refer to <Operations
and Settings>.
Notations used for menus in this manual
In this manual, the following notations are used for menu names
assigned to the number buttons.
Number
button
Menu name notation
in this manual
Number
button
Menu name notation
in this manual
[21] SHUTTER [36] CTRL TYPE
[22] ND FILTER [37] AUTO IP
[23] FUNCTION [38] SWAP IP
[24] CAMERA SETUP [39] MANUAL IP
[25] RP SETUP [40] PORT NO
[26] PAN DIRECTION [41] SW SETUP
[27] TILT DIRECTION [42] SW FUNCTION
[28] ZOOM DIRECTION [43] SW INPUT
[29] FOCUS DIRECTION [44] TALLY
[30] PTZ ADJUST [45] GPI OUT
[31] PM GRP1 [46] SD SAVE
[32] PM GRP2 [47] SD LOAD
[33] PM GRP3 [48] SD DELETE
[34] PM GRP4 [49] SYSTEM
[35] USER BUTTON [50] ALARM
Menus appear as, for example, “SHUTTER menu [21]” in this manual.