Filter
Top Products
16
Parts and their functions (continued)
R/B PED dials [R/B PED]
Use these to individually adjust the pedestal of the R channel and
B channel (R PED and B PED) in order to set the desired black
balance.
Turned clockwise : Displays the setting values of the
R PED and B PED on the LCD panel
and changes the value in the plus (+)
direction.
Turned counterclockwise: Displays the setting values of the
R PED and B PED on the LCD panel
and changes the value in the minus (–)
direction.
Pressing these dials displays the current setting values on the LCD
panel (3).
Color adjustment ENABLE button [ENABLE]
Use this to enable or disable operation of the color adjustment
section.
Button indicator on : Operation of the color adjustment section is
enabled.
Button indicator off: Operation of the color adjustment section is
disabled.
Operating the DETAIL button (K), GAIN button (), PED dial (N),
R/B GAIN dials (), and R/B PED dials () switches the LCD
panel display to the corresponding value, but the original value is
redisplayed after approximately 3 seconds.
Indicator section
IRIS indicator [IRIS]
This indicates the position of the lens iris of the remote camera in
6 levels.
ZOOM indicator [ZOOM]
This indicates the position of the lens zoom of the remote camera in
6 levels.
FOCUS indicator [FOCUS]
This indicates the position of the lens focus of the remote camera in
6 levels.
Menu and memory selection section
Main mode selection buttons [MENU] [PMEM] [TMEM]
Use these to select the operation mode of the menu and memory
selection section.
Pressing a button turns on the button indicator of only that button and
switches to the corresponding operation mode.
MENU: Switches to the mode for selecting a menu (MENU mode).
⇒ “Basic operations for the menus” (page 20)
PMEM: Switches to the mode for recalling, storing, and deleting
preset memory (PMEM mode).
⇒ “Operating preset memory (PMEM)” in Operations and
Settings (page 13)
TMEM: Switches to the mode for recalling, storing, deleting, and
restoring tracing memory (TMEM mode).
⇒ “Operating tracing memory (TMEM)” in Operations and
Settings (page 18)
Memory mode selection buttons
[MEM STORE] [MEM DELETE] [RESTORE]
Use these to select any operation from store, delete, and restore
when PMEM or TMEM has been selected with the corresponding
main mode selection button ().
Pressing a button when its indicator is off turns on the button indicator
of only that button and switches to the corresponding operation
mode.
Pressing a button when its indicator is on turns off all three button
indicators and switches to the mode for recalling memory (RECALL
mode).
MEM STORE : Switches to the mode for storing memory (STORE
mode).
MEM DELETE : Switches to the mode for deleting memory (DELETE
mode).
RESTORE : Switches to the mode for restoring tracing memory
(RESTORE mode).
For details on each mode, refer to the following.
⇒ “Operating preset memory (PMEM)” in Operations and Settings
(page 13)
⇒ “Operating tracing memory (TMEM)” in Operations and Settings
(page 18)