Filter
Top Products
17
Parts and their functions (continued)
Number buttons [1] to [50]
Use these to select menus, preset memory, and tracing memory.
X
MEMORY SETTING button [MEM SETTING]
Use this to set SPEED and SCOPE of the preset memory.
⇒ “Operating preset memory (PMEM)” in Operations and Settings
(page 13)
PMEM PAGE indicators [1] [2]
These indicate the page number of the preset memory.
One of PMEM PAGE [1] and [2] lights green.
Z
PMEM PAGE button [PMEM PAGE]
Use this to select the page number of the preset memory.
Each press of the button switches which of the PMEM PAGE
indicators () is on in the order of [1]→[2]→[1], and so on.
[
MEMORY ENABLE button [MEM ENABLE]
Use this to enable or disable operation of the preset memory and
tracing memory.
Button indicator on : Enabled
Button indicator off: Disabled
Menu operation is possible even when the MEMORY ENABLE
button indicator is off.
User button section
USER buttons [USER 1] to [USER 8]
Use these to access the functions assigned to USER 1 to USER 8.
⇒ “Assigning functions to the USER buttons” in Operations and
Settings (page 30)
Also, when the SHIFT button () is pressed to turn on its indicator,
you can use these buttons to access preset memory groups and
SCENE 1 to SCENE 4 of the remote camera.
⇒ “Making image adjustments for the selected remote camera” in
Operations and Settings (page 6)
SHIFT button [SHIFT]
Use this to switch the operation mode for USER buttons.
Each press of the button switches the button indicator in the order of
on → off → on, and so on.
Button indicator off: The SHIFT button is disabled.
Pressing the USER 1 to USER 8 buttons
accesses the functions assigned to USER 1
to USER 8.
Button indicator on : The SHIFT button is enabled.
Pressing the USER 1 to USER 8 buttons
accesses the preset memory groups and
SCENE 1 to SCENE 4 of the remote camera.
USER ENABLE button [ENABLE]
Use this to enable or disable operation of the USER buttons.
Button indicator on : Operation of the USER buttons is enabled.
Button indicator off: Operation of the USER buttons is disabled.
Memory card section
Memory card slot
Insert an SD memory card (option) or SDHC memory card (option).
Memory card access lamp
This is lit while the memory card is being accessed.
(It blinks when access for a short period of time is performed
repeatedly.)
Do not turn off the power of the unit or remove the memory card while
the access lamp is lit or blinking. Doing so may cause the data in the
memory card to become corrupt.
Memory cards
Memory cards used with the unit should conform to SD or SDHC
standards.
Be sure to use the unit to format memory cards.
Memory cards with the following capacity can be used with the
unit.
SDXC memory cards and MultiMediaCards (MMC) are not
supported.
SD 8 MB to 2 GB
SDHC 4 GB to 32 GB
For the latest information not described in the Operating
Instructions, refer to the following websites.
(Japanese) http://panasonic.biz/sav/
(English) http://pro-av.panasonic.net/
Observe the following points when using and storing the
memory cards.
• Avoid high temperature and humidity.
• Avoid water droplets.
• Avoid static electricity.