Filter
Top Products
15
Parts and their functions (continued)
Color adjustment section
BARS button [BARS]
Use this to select the video signal output from the remote camera.
Each press switches between the signal for the images shot by the
camera and the color bar signal.
Button indicator off: Outputs the signal for the images shot by the
camera
Button indicator on : Outputs the color bar signal
H
AWB button [AWB]
Use this to execute automatic adjustment of the white balance and
then register the adjustment result to memory A or B of the remote
camera.
The AWB button indicator blinks during white balance adjustment
and turns off when adjustment is successful. When adjustment was
not possible, the indicator blinks continuously and the white balance
setting is not changed.
When automatic adjustment of the white balance ends, the R GAIN
and B GAIN values become ±0.
If the AWB button is pressed when the color bar signal is output
from the remote camera (when the BARS button () indicator is
on) or when ATW is selected (when the ATW button () indicator
is on), the adjustment is not made and the button indicator blinks
continuously.
When adjustment was not possible, try changing, for example, the
light source, lens iris, and subject, and then perform adjustment
again.
I
ABB button [ABB]
Use this to execute automatic adjustment of the black balance.
When the button is pressed, adjustment is performed by
automatically closing the iris.
The ABB button indicator blinks during black balance adjustment
and turns off when adjustment is successful. When adjustment was
not possible, the indicator blinks continuously and the black balance
setting is not changed.
When adjustment was not possible, check the camera and lens
cable connections, and then perform adjustment again.
WHITE BAL A/B/ATW buttons
[WHITE BAL A/B/ATW]
Use these to select the white balance mode of the remote camera.
A : Press the A button to switch to the white balance state
registered in memory A of the remote camera and to turn on
the A button indicator.
Pressing the AWB button (H) after the A button automatically
adjusts the white balance and registers the adjustment result
to memory A of the camera.
B : Press the B button to switch to the white balance state
registered in memory B of the remote camera and to turn on
the B button indicator.
Pressing the AWB button (H) after the B button automatically
adjusts the white balance and registers the adjustment result
to memory B of the camera.
ATW: Press the ATW button to switch to the auto tracking white
balance (ATW) mode for automatically tracking the white
balance in accordance with the lighting conditions.
K
DETAIL button [DETAIL]
Use this to adjust the details of the remote camera.
Pressing the button displays the DETAIL setting values of the remote
camera on the LCD panel (3). Use the F1 dial and F2 dial (5) to
change the setting values.
GAIN button [GAIN]
Use this to change the gain setting of the remote camera.
Pressing the button displays the GAIN setting value of the remote
camera on the LCD panel (3). Use the F1 dial (5) to change the
setting value.
M
AUTO GAIN button [AUTO]
Use this to automatically adjust the gain of the remote camera.
Button indicator on : Auto gain
Button indicator off: Manual gain
If the shooting mode is set to “FullAuto” when AW-HE50 or
AW-HE60 is being controlled, the gain is fixed to to auto gain and
button operation is disabled.
N
PED dial [PED]
Use this to adjust the master pedestal.
Turned clockwise : Displays the setting value of the master
pedestal on the LCD panel and changes
the value in the plus (+) direction.
Turned counterclockwise: Displays the setting value of the master
pedestal on the LCD panel and changes
the value in the minus (–) direction.
Pressing this dial displays the current setting value on the LCD
panel (3).
R/B GAIN dials [R/B GAIN]
Use these to individually adjust the gain of the R channel and B
channel (R GAIN and B GAIN) in order to set the desired white
balance. The adjustment value is registered to memory A or B of the
remote camera.
Turned clockwise : Displays the setting values of the R
GAIN and B GAIN on the LCD panel
and changes the value in the plus (+)
direction.
Turned counterclockwise: Displays the setting values of the R
GAIN and B GAIN on the LCD panel
and changes the value in the minus (–)
direction.
Pressing these dials displays the current setting values on the LCD
panel (3).
If these dials are turned when ATW is selected (when the ATW
button [] indicator is on), “–––” appears on the LCD panel and
the white balance settings are not changed.