Filter
Top Products
Troubleshooting
Troubleshooting
9392
Replacing the Nintendo 3DS Battery Pack
Replacing the Nintendo 3DS Battery Pack
Repeated charging will decrease battery life and reduce the length of time you can use the system before recharging.
If usage time is noticeably reduced, replace the battery pack using the procedure detailed below.
Please contact Nintendo Customer Support for further information on where to purchase a replacement (pages 109 – 111).
t
If the system is used by a young child, a parent or legal guardian should replace the battery pack for them.
t
Always turn the power o and disconnect the AC adapter before replacing the battery pack.
Replacing the Nintendo 3DS Battery Pack
Unscrew the battery cover
Use a screwdriver to loosen the four screws securing the battery cover, then lift it o.
Note: Using the wrong type of screwdriver may damage the head of the screw, leaving you unable to remove the battery cover.
Remove the battery pack
Remove the battery pack as shown.
Wait at least 10 seconds, then insert
a new battery pack
Insert the new battery pack as shown.
Note:
t
Ensure that the battery is facing in the right direction.
t
Inserting the new battery pack immediately after removing the old
one can result in the power LED not functioning correctly.
Replacing the Nintendo 3DS Battery Pack
Battery Disposal
t
Apply some tape over the positive (+) and negative (–) connectors.
t
Do not remove the label.
t
Do not attempt to disassemble the battery pack.
t
Do not damage the battery.
The Nintendo 3DS system contains a lithium-ion rechargeable battery pack. Please dispose of this product in accordance with local regulations.
t
Discarding batteries in your general household waste can be harmful to the environment. When disposing of the battery pack, follow
appropriate local guidelines and regulations.
t
In accordance with the Directive on Batteries and Accumulators and Waste Batteries and Accumulators (2006/66/EC), battery collection
and recycling schemes should be in place in all EU Member States.
Replace the battery cover, and tighten
the four screws
After removing the battery, the date and time settings will be reset.
You should set them again by opening System Settings from the
HOME Menu, selecting OTHER SETTINGS and then DATE & TIME.
Note: Always replace the battery cover. If the system is subjected to
a shock while the cover is o, the battery could be damaged leading to
re or explosion.
1
2
3
4