8 CF-ADP Applied Instructions Explanation
8.5 FNC 302 - FLWR / Data write
63
FX3U-CF-ADP User's Manual
1
Introduction
2
Specification
3
System
Configuration
4
Installation
5
Wiring
6
Functions
7
Before
Programming
8
CF-ADP Applied
Instructions
Explanation
9
Program
Examples
10
Troubleshooting
• Sequence program
It is assumed that D101 and D100 store 32-bit hexadecimal data, Y010 stores bit data, Y011 stores bit data,
R100 stores 16-bit decimal data, and R101 stores 16-bit decimal data respectively.
This program does not describe such values.
Specify the line position of the
writing destination.
Additional writing is specified.
D32K-1
D33K5
FNC 12
MOV
Specify the data column
position in the writing
destination.
Additional writing is specified.
Data writing.
Only "mixed type" data is
specified.
Total number of written points.
"5 points" is specified.
M8425
CF card is
mounted
M0 M8424
CF-ADP
unit
ready
Specify the data writing type.
"Mixed type data" is specified.
FNC 12
MOV
D31K-1
FNC302
FLWR
K5
D30K0
FNC 12
MOV
D100 D30 D20 K2
FNC 12
MOV
M0SET
X000
Specify the line position of the
writing destination.
Additional writing is specified.
D52K-1
D53K2
FNC 12
MOV
Specify the data column
position in the writing
destination.
Additional writing is specified.
Number of written points.
"2 points" is specified.
FNC 12
MOV
D51K-1
D50K1
FNC 12
MOV
FNC 12
MOV
Specify the data writing type.
The bit type is specified.
Data writing.
The data stored in the 2nd data
type is written.
FNC302
FLWR
K5 Y10 D50 D20 K2
To next page
To next page
The data stored in the
2nd data type is written.
"Only mixed type data" is
specified
D34K0
FNC 12
MOV
Writing destination.
The CompactFlash
TM
card is
D54K0
FNC 12
MOV
Writing destination.
The CompactFlash
TM
card is
Specify the line position of the
writing destination.
Additional writing is specified.
D42K-1
D43K1
FNC 12
MOV
Specify the data column
position in the writing
destination.
Additional writing is specified.
Number of written points.
"1 point" is specified.
FNC 12
MOV
D41K-1
D40K5
FNC 12
MOV
FNC 12
MOV
Specify the data writing type.
The 32-bit hexadecimal type is
specified.
Data writing.
The data stored in the 1st data
type is written.
FNC302
FLWR
K5 D100 D40 D20 K2
The data stored in the 1st
data type is written.
D44K0
FNC 12
MOV
Writing destination.
The CompactFlash
TM
card is
specified.
specified.
specified.