Filter
Top Products
10 Troubleshooting
10.1 Troubleshooting procedure
103
FX3U-CF-ADP User's Manual
1
Introduction
2
Specification
3
System
Configuration
4
Installation
5
Wiring
6
Functions
7
Before
Programming
8
CF-ADP Applied
Instructions
Explanation
9
Program
Examples
10
Troubleshooting
37
Outside device point number range in mixed type
specification
The number of written points/read points specified by the parameter is
outside the setting range.
Something may be wrong with mixed type instructions.
Check the parameter contents, execution order, etc. in mixed type
instructions.
38 Mixed type instruction execution error The number of written/read points specified by the parameter is outside
the setting range.
Check the parameter contents, execution order, etc. in mixed type
instructions.
42 Response device type error
43 Frame number error
46 Too many characters
The character string exceeds 512 full-width characters, or the data
name exceeds 32 full-width characters.
200 System error
Something may be wrong with the hardware.
Contact your local Mitsubishi Electric distributor.
201 Power shutdown history reading error
Check whether a CompactFlash
TM
card having sufficient free space is
mounted correctly. When a CompactFlash
TM
card is mounted correctly,
something may be wrong with the hardware.
Contact your local Mitsubishi Electric distributor.
202 Power shutdown history writing error
203 Power shutdown history corruption
204 Power shutdown history backup error
205 System error
Something may be wrong with the hardware.
Contact your local Mitsubishi Electric distributor.
206 Power shutdown detection
Shutdown of the supply voltage is detected.
Check whether the power is supplied correctly.
300 SDRAM error
Something may be wrong with the hardware.
Contact your local Mitsubishi Electric distributor.
301 ROM error
302 EPROM error
303 SRAM error
304 SUM check error
400
CompactFlash
TM
card unmounted error
The CompactFlash
TM
card is not mounted in the CompactFlash
TM
card
slot.
Mount the CompactFlash
TM
card correctly in the CompactFlash
TM
card
slot.
401
CompactFlash
TM
card error
The CompactFlash
TM
card may be defective.
Replace the CompactFlash
TM
card with another one.
402
CompactFlash
TM
card mount error
The CompactFlash
TM
card is not formatted correctly.
Format the CompactFlash
TM
card, or replace it with another one.
404 CF free space acquisition error
The CompactFlash
TM
card may be defective.
Format the CompactFlash
TM
card, or replace it with another one.
405 CF FULL
The CompactFlash
TM
card is full.
Delete unnecessary data, or replace the CompactFlash
TM
card with
another one.
406 Directory creation error
A folder was not able to be created in the CompactFlash
TM
card.
Check whether the number of files and folders in the root directory in
the CompactFlash
TM
card does not exceed 512.
Check whether the CompactFlash
TM
card is formatted, and whether it
is ready for data writing.
407
CompactFlash
TM
card format error
The CompactFlash
TM
card is not formatted correctly.
Check whether the CompactFlash
TM
card is mounted correctly.
Format the CompactFlash
TM
card, or replace it with another one.
500 Line file error
Access to the file management information file has failed.
Check whether the CompactFlash
TM
card is mounted correctly.
501 ID table open error
The file management information was not able to be read from the
CompactFlash
TM
card.
When reading or deleting a file, confirm that the target file exists.
502 ID table write error
The file management information was not able to be created in the
CompactFlash
TM
card.
Check whether the CompactFlash
TM
card is ready for data writing.
Error
code
Error definition Error corrective action