Filter
Top Products
48 PERC H200 and 6Gbps SAS HBA BIOS
Volume
Status
Status of the current volume
The status definitions are given as:
Optimal—All members of the volume are online and ready.
Degraded—One or more members of a RAID 1 or RAID 10 volume have
failed or are offline. The volume can be returned to the Optimal state by
replacing the failed or offline member.
Disabled—The volume is disabled
Quiesced—The volume is quiesced
Resync—The volume is resynchronizing
Failed—The volume has failed
PermDegraded—The volume is permanently degraded. This state
indicates that the failure threshold on the primary member was reached
while no secondary was available for correction. The data on the volume
may be accessible, but the volume cannot be returned to the optimal
state.
Inactive—The imported volume is inactive. The volume must be
activated before it can be accessed.
Initializing—The array is undergoing Background Initialization
BGI Pending—The array is queued up for a Background Initialization
Checking—The array is queued up for a Consistency Check
Slot
Number
Slot number in which the specified device sits
Device
Identifier
Identifier text for the specified device
RAID
Disk
Specifies whether or not the disk is part of a RAID volume (Yes or No).
This field is inactive out under the following conditions:
• The disk does not meet the minimum requirements for use in
a RAID volume.
• The disk is not large enough to mirror existing data on the primary
physical disk.
• The disk is a part of another volume.
Table 6-2. Volume Field Descriptions (continued)
Field Description
PERC H200.book Page 48 Tuesday, July 13, 2010 4:15 PM