Filter
Top Products
36 Driver Installation
Updating the Windows Driver
Perform the following steps to update the Windows driver for
the PERC H200 card that is already installed on your system:
NOTE: It is important that you close all applications on your system before
you update the driver.
1
Follow the step below according to your operating system.
•
For Windows Server 2003
:
Click
Start
→
Settings
→
Control Panel
→
System
.
•
For Windows Server 2008:
Click
Start
→
Settings
→
Control Panel
→
System
.
•
For Windows Server 2008 R2
:
Click
Start
→
Control Panel
→
System and Security
→
System
• The
System Properties
screen is displayed.
2
For Windows Server 2003,click on the
Hardware
tab. For Windows Server
2008 and Windows Server 2008 R2, go to step 3.
3
Click
Device Manager
.
The
Device Manager
screen is displayed.
NOTE: An alternative method is to open Device Manager. In Windows
Explorer, right-click on My Computer and select Manage. The Computer
Management screen is displayed. Select Device Manager in the left panel.
4
Double-click on
SCSI and RAID Controllers
.
NOTE: In Windows 2008, SAS is listed under Storage Controllers.
5
Double-click the RAID controller for which you want to update the driver.
6
Click the
Driver
tab and click
Update Driver
.
The
Upgrade Device Driver
Wizard
screen is displayed.
7
Make the driver files available with the USB key, or other media.
8
Select
Install from a list or specific location
.
9
Click
Next.
PERC H200.book Page 36 Tuesday, July 13, 2010 4:15 PM