Filter
Top Products
Clarity User Guide, March 1, 2011 - Rev. 1.06
Page 26
Blocker Arm Load Position - Values are used to position the blocker arm so that it does not
collide with the slot in the case top.
The Calibration Screen
Figure 3.6 – Calibration Screen
This screen contains the calibration values obtained in performing the five calibrations
necessary for best performance of the Clarity:
Preliminary Camera Focus (described in the Technician Screen)
Camera Calibration
Screen Calibration
Block Position Offsets Calibration
Power and Prism Calibration
The preliminary camera focus calibration is performed via the Technician screen. The other
calibrations are described in Chapter 4: Calibration.