Filter
Top Products
Clarity User Guide, March 1, 2011 - Rev. 1.06
Page 14
connection. If you are using an Ethernet connection, then you must set the two ports in the
TCP/IP Network Auto-Connect Settings box.
CAUTION
Keep hands away from unit during the blocking function.
The Touch Screen Display and Job Screen
CAUTION
Do not use a sharp object (pencil or pen point, paper clip, etc.) on the touch screen as it may
scratch or tear the screen. Clean the screen with a microfiber cloth such as is used to clean
eyeglasses. A soft cloth slightly dampened with clear water may be used for hard-to-remove
spots. Turn the Clarity off before cleaning the screen.
The Clarity is equipped with a touch screen display. A mouse and keyboard can be installed
on the rear bulkhead if desired. A mouse is recommended to have at all times for manual
alignment of progressives, bifocals and trifocals. There are two USB ports that can be used as
well as two PS-2 connectors at the rear of the machine. (See Fig. 1.3) If you install a PS-2
mouse or keyboard while the machine is ON, you will have to reboot the machine (cycle the
power OFF and then ON) for the machine to recognize
there is a device connected.
Once the unit is powered ON, it will boot to the main Job screen. (See Fig. 2.1.) The
program will open, initialize communications, and the camera will go through several checks.
Fig. 2.1 - Job Screen