A SERVICE OF

logo

Open as PDF
next previous
Running Diagnostic Tests
Multiple Test
Syntax
Use the following syntax to run multiple tests:
>>> test
device_name1:device_name2
Return
where device_name1 is the device you want to start with, and
device_name2 is the last device you want to test. The diagnostic
tests are run in the same order as the list of device tests in
Table 14–2.
>>> test
Return
runs all tests including TURBOchannel tests.
Example
Diagnostic Test
One diagnostic test is the SCC test, which tests the
communication devices attached to your system unit, such
as the keyboard and mouse. Figure 14–1 shows an example of
the SCC test display.
Figure 14–1 SCC Diagnostic Test Display
>>> test scc
Return
T-STS-SCC-OK
>>>
14–6 Running Diagnostic Tests