A SERVICE OF

logo

Open as PDF
next previous
Moving the Secure System Jumper
Step 2:
Remove
System Unit
Cover
If you have a monitor or a terminal on top of the system unit,
move it aside now.
Figure 11–1 shows how to remove the cover from the system unit
as follows:
1. Loosen the thumbscrew located in the center of the rear of
the system unit .
2. Slide the cover forward and upward , until it releases from
the system unit.
3. Place the cover safely aside for use later.
Figure 11–1 Removing the System Unit Cover
MLO-010360
2
1
0
2
1
11–6 Using the Password Security Feature