A SERVICE OF

logo

Open as PDF
next previous
Moving the Secure System Jumper
Step 8: Replace
System Unit
Cover
Position the system unit cover at the front of the system unit
and push it down and backward , as shown in Figure 11–7.
Tighten the thumbscrew on the rear of the system unit once
the cover is securely in place.
Figure 11–7 Replacing the Cover
MLO-010361
2
1
0
1
2
Step 9: Turn
On System
Turn on the system as described in Chapter 6. Note that the
system cover must be replaced before you turn on the system
power.
Press the halt button to display the console prompt (>>>) if your
system does not halt automatically. From this point on, you
will need to use the
login
command to access privileged console
commands.
11–12 Using the Password Security Feature