Interpreting the show Command Displays
Interpreting the show Command Displays
Overview
Your system includes many elements: components, memory
modules, and optional devices. The
show
console commands test
your system and display the status of these elements. Table 13–9
lists some of the
show
console commands and the information
each provides:
Table 13–9 Information Provided by the show Console
Commands
This command... Lists the status of...
show config
System components, revisions and
installed TURBOchannel options
show device
The Ethernet interface and any optional
devices, such as internal and external
SCSI disk drives
show error
Any errors detected on your system
show memory
All memory modules
Each of these commands is described in the following sections.
Error in show
config Display
The
show config
command tests and displays information about
system components and memory modules. The command also
indicates whether errors were detected during the diagnostic
test.
13–12 Identifying a Problem
