MMB Web-UI (Web User Interface) Operations
Remarks
If the abnormality in rotational frequency of a fan is detected again after executing [Status Clear], then, the
status changes to [Failed Status]. Accordingly, even if the status of a fan, having abnormal rotational
frequency from the beginning is cleared, the status remains as [Failed].
TABLE 1.40 Display items of [Fans] window
Fan Redundancy Displays the redundancy status of fan.
· Redundant: The Fans are Redundant
· Non-Redundant: Sufficient Resource: Redundancy of fan is lost, however, there
are sufficient fans, to continue the operations of the system.
· Non-Redundant: Insufficient Resource: The number of fans is less due to
redundancy, and fans to continue operations of the system are sufficient.
Displays the slot location of the PSU or FANU to which the FANM belongs.
Displays the status of each fan
· OK
· Not-present
Displays the part number of the fan.
Displays the rotational frequency (rpm) of each fan.
Displays the lower limit and upper limit of the warning-level
rotational frequency of each fan. (If the rotational frequency is
lower or upper than this limit, it is considered to be abnormal)
Displays the lower limit and upper limit of the critical-level
rotational frequency of each fan. (If the rotational frequency is
lower or upper than this limit, it is considered to be abnormal)
TABLE 1.41 [Fans] Window Button
Clears the status of fan.
(1) Menu Operation
[System] – [Fans]
(2) Window Operations
1. Click the [Status Clear] button.
Dialog box for confirmation appears.
2. Click the [OK] button to clear the Status of the fan and, click the [Cancel] button when you do not
want to clear the fan status.
[Message]
This section describes the messages to be displayed on this window.
Failed to clear the status.
For details on the messages displayed on the window, see PRIMEQUEST 2000 Series Message Reference
(C122-E178EN).
