MMB Web-UI (Web User Interface) Operations
Redirection
Interface
Firmware
Update
Restore
Restore MMB
Configuration
MMB...] is not
affected by
maintenance
MMB...] can be
operated only
by maintenance
1.1.12 Web-UI menus in maintenance mode (maintenance personnel)
This section outlines the Web-UI menus that are available to maintenance personnel (Administrator or CE
privileges) in maintenance mode.
The maintenance mode column has the following items. For details on the maintenance mode, see 1.1.6
Web-UI menus in maintenance mode.
- Hot System: Hot System Maintenance (Target unit not included in a partition)
- Hot Partition: Hot Partition Maintenance (Target unit in a activated partition)
- Warm System: Warm System Maintenance (Target unit in a powered off partition)
- Cold System: Cold System Maintenance (All partitions powered off, breaker on), and Cold System
Maintenance (All partitions powered off, breaker off)
The meanings of abbreviations in the table are as follows:
RW: The account user can refer to and set information in the window.
RO: The account user can only refer to information in the window.
N/A: The account user cannot view the menu and submenu.
*1 The account user can operate partitions not in maintenance mode in this window.
*2 The account user can operate only partitions in maintenance mode in this window.
*3 The SB is neither a Home SB nor Reserved SB. Alternatively, the SB is the Home SB in the Power Off
status in a partition in the Standby status.
*4 The partition is in the Standby status.
