Setting of sadump environment
TABLE 6.12 Displayed contents of the help display area for operation
Move the cursor up or down.
<Enter>= Select Entry
If [1], [2] or [3] is selected, move to [Select device].
Otherwise, perform processing corresponding to the
Note
- Don’t operate [F2] key. [Esc] key is displayed on the screen but don’t operate it.
- If [Commit Changes and Exit] is performed, all the selected devices, including the devices that has already
been selected previously, is being checked. If there’s a selected device that is actually not present, the
device selection is automatically cleared.
6.8 [Select device] Menu
This is displayed when [1], [2] or [3] is set in the [Setting dump device] menu.
Dump devices on the current system is listed. Select a dump device from a list.
In case of multiple disk configurations, select the 1st dump disk.
FIGURE 6.11 [Select device] Menu
