MMB Web-UI (Web User Interface) Operations
FIGURE 1.12 [System Power Control] Window
TABLE 1.34 Display Items and Setting Items in [System Power Control] Window
Power on all partition(s)
Turns on the power of all the partition(s).
If the status, in which only the power of the chassis is ON, is selected, the
power of all partitions is turned on.
Power off all partition(s)(all
partition(s)will be
Shuts-down all the partitions and turns off the power of the chassis.
Turns off the power supply without shutting down the running operating
system on the partition.
TABLE 1.35 [System Power Control] Window Button
When the [Apply] button is clicked after selecting the control item by the radio button, the power
supply is controlled according to the selected information.
When the [Cancel] button is clicked, the power supply returns to the original state without being
controlled.
(1) Menu Operation
[System] – [System Power Control]
(2) Window Operations
1. Select the power control item by radio button and then click the [Apply] button.
Dialogue box is displayed for confirmation
2. Click the [OK] button.
The power supply is controlled according to the selected information
[Message]
