MMB Web-UI (Web User Interface) Operations
When Add is instructed for a Partition in which operating system has already operated, and when the
operating system supports Hot-add, SB/IOU added during operating system operation executed by Hot-add
can be used.
(1) Menu Operation
[Partition] - [Partition Configuration] - [Add Unit] button
(2) Window Operations
1. Select the SB or IOU to be incorporated in the partition, and then click the [Apply] button.
A confirmation dialog box appears.
2. Click [OK] button.
The SB or IOU will be incorporated.
3. Click the [Apply] or [Cancel] button.
Return to [Partition Configuration] window.
[Message]
This section describes the messages to be displayed on this window.
Unable to add the specified SB#%aa to the partition due to CPU mismatch between
SBs.
Unable to add the specified SB to the partition due to CPU composition abnormal.
Unable to add the specified SB to the partition due to DIMM composition abnormal.
Unable to add the specified SB to the partition due to DIMM does not satisfy
requirements of Mirror Mode.
Unable to set configuration because the power on/off is processing. Please execute it
after a while again.
Unable to add the specified SB to the partition due to SB composition abnormal.
Unable to add the specified SB to the partition due to VRM composition abnormal.
For details on the messages displayed on the window, see PRIMEQUEST 2000 Series Message Reference
(C122-E178EN).
When multiple errors are detected, multiple errors are displayed in the dialog box.
[Remove SB/IOU from Partition] Window
Select the partition by using radio button of [Partition Configuration] window, and when [Remove] button is
clicked, [Remove SB/ IOU from Partition] window appears.
