MMB Web-UI (Web User Interface) Operations
TABLE 1.92 Setting and display items in the [IPv6 Interface] window (PRIMEQUEST 2400E/2800E)
MMB Virtual/Physical IP Address
Sets the virtual IPv6 IP address for Web-UI access.
If the MMB has a redundant configuration, the switched MMB will take over this
virtual IP address.
Sets the host name in FQDN format.
You can enter the following characters:
[a-z], [A-Z], [0-9], - (hyphen), . (period).
Only the above characters can be specified.
Also, the following restrictions apply:
The character string must begin with an alphabetic character.
The character string cannot begin or end with the following character specified:
-
(hyphen) or . (period).
The default is "PRIMEQUEST" + Product Serial Number.
For example, if the serial number is 1020516004, the character string is
"PRIMEQUEST1020516004".
Remarks
The setting in FQDN format is not required if you are not operating on the domain.
Automatically acquires data with a click of the [Auto] button. The global address,
prefix length, and gateway IP address are automatically acquired to overwrite
Sets the gateway IP address.
Sets the physical IP address assigned to the MMB#0 interface.
This item is available only if the system has MMB#0.
You cannot access the Web-UI from this interface.
Unless MMB#0 is mounted, the window does not display the [MMB#0 IP Address]
table.
Sets whether to enable or disable the MMB#1 physical IP address.
Sets the host name in FQDN format.
Automatically acquires data with a click of the [Auto] button. The global address,
prefix length, and gateway IP address are automatically acquired to overwrite
Sets the gateway IP address.
Sets the physical IP address assigned to the MMB#1 interface.
This item is available only if the system has MMB#1.
You cannot access the Web-UI from this interface.
Unless MMB#0 is mounted, the window does not display the [MMB#1 IP Address]
Sets whether to enable or disable the MMB#1 physical IP address.
Sets the host name in FQDN format.
Automatically acquires data with a click of the [Auto] button. The global address,
prefix length, and gateway IP address are automatically acquired to overwrite
