MMB CLI (Command Line Interface) Operations
MMB configuration and other
Command termination code display
Displays the termination code for the last command
executed.
Firmware revision status/version check
Displays the batch firmware update progress.
Displays a list of network routes.
Displays the physical Ethernet address.
Displays the physical Ethernet address.
Displays the network environment setup status.
Displays a list of port numbers being used.
Displays the REMCS network setting.
Dynamic Partiiton HotAdd.
Dynamic Reconfiguration HotRemove.
set partition dynamic_partitioning
Sets DR state of partition.
show partition dynamic_partitioning
Displays DR state of partition.
TABLE 2.4 MMB CLI commands (Partition Operator)
Operator (*)
(Same
Operator (*)
(Other
NMI interrupt instruction
Text Console connection to partition
Adds a partition component.
Removes a partition component.
show partition configuration
Displays the partition configuration.
set partition memory_operation_mode
Sets Memory operation mode.
show partition memory_operation_mode
Displays Memory operation mode.
set partition memory_mirror_ras_mode
Sets Memory operation at mirror mod
